"We carry out load test at our facilities, in the past the load was calculated by pressure versus cylinder area. However when we call third party, to witness the test, we normally face a problem to evidence the cylinder area.
So we decided to install a Straightpoint load cell.
Now the issue is over as we can now read the load direct."
我们经常需要在公司自己的场地上进行负荷测试，过去对于加载负荷值的计算，我们是通过液压面积所受压力大小确定的。但是，当需要第三方机构对此测试进行现场认证时，我们总会遇到一些问题。因此，我们决定采用速得测力环设备来辅助试验负荷测试。现在，这些问题都已迎刃而解，我们可以通过它直接读取测试中实际加载的负荷值。